Custom Orders/Estimates
Custom Orders/Estimates
For Active Estimates or Pro-Forma Invoices

Item #: Custom

If you are ordering from an Estimate or Pro-forma Invoice, you will need the Estimate Number or Invoice Number that can be found in the upper right hand corner.

The Product Description(s), Quantity, Price, and Terms must be correct and acceptable as described on the Estimate or Pro-forma Invoice.

The Bill To, Ship To, and Method of Shipping can be edited during check out if there are changes.

By continuing, you authorize CST - The Composites Store to process your order as described in the Estimate or Pro-forma Invoice including the Terms described therein. Custom orders cannot be refunded (except for manufacturer's defects) or cancelled once placed.

If any of the above conditions are not acceptable, please call (USA and Canada) 661-822-4162 or e-mail (Domestic and International) info@cstsales.com

$0.00

Custom Orders/Estimates Notes:
Qty:

Request for Quotes/Estimates
For New Quotes/Estimates

Item #: Custom 2
If you are requesting a custom quote for a product or quantity not listed on our website, please provide the following information. CST has over 70 vendors and may be able to find the material you need. Please be advised, some manufacturers haveminimum orders, so we will quote the closest quantity to your requirements.
You may send this information by E-Mail to info@cstsales.com and Technical Support will contact you as soon as they can.
Company (if applicable):
Contact/Customer:
Phone: E-Mail:
Country: USA or Other - Please Specify:
Application or Industry Target:
Source - How did you find us?
Common Product Areas:
Fabrics, Tapes, Etc.
Vacuum Bagging or Release Films/Fabrics
Carbon Fiber Tubes, Rods or Strips
Carbon Fiber Plates or Sandwich Panels
Fabrics, Tapes, Etc.:
Materal Type:
Carbon Fiber
Aramid (Kevlar)
Fiberglass
Other (Please Specify)
Specification(s) as applicable:
Weight
Weave
Style Number, if known
Width
Thickness
Resin Compatibility Requirement:
Epoxy
Polyester
Vinylester
Other (Please Specify)
Quantity Needed
Some products have a minimum order so
we will quote as close to the quantity required as possible.
Additional Requirements or Considerations:
Vacuum Bagging or Release Films/Fabrics:
Materal Type:
Please Specify
Specification(s) as applicable:
Weight
Porosity (if applicable)
Style Number, if known
Width
Thickness
Temperature Requirements
Resin Compatibility Requirement:
Epoxy
Polyester
Vinylester
Other (Please Specify)
Quantity Needed
Some products have a minimum order so
we will quote as close to the quantity required as possible.
Carbon Fiber Tubes, Rods or Strips:
Profile:
Rods
Tube
Strip
Applicable Specifications:
Outside Diameter
Inside Diameter (tubes only)
Strip Cross Section
Length, each
Quantity Needed
Some products have a minimum order so
we will quote as close to the quantity required as possible.
Carbon Fiber Plates or Sandwich Panels:
Our oven accomodates a maximum of 22" x 70". Tooling charges may be applicable.
Plate Thickness or Skin Thickness, if sandwich panel
Width
Length
Fiber Orientation, skins if sandwich panel - Please Specify:
Unidirectional - Specify Direction
Bi-Directional - 0°/90° - alternating layers unless otherwise specified
Isotropic - 0°/90°/±45°
Core Material: Rohacell or End-grain Balsa
Core Thickness:
Surface Finish:
Peel Ply/Matte - Recommended for maximum strength to weight
Smooth/Glossy - Cosmetic
Quantity Needed
Some products have a minimum order so
we will quote as close to the quantity required as possible.

Prices are in US dollars and subject to change without notice.