PRO-SET - 285 Fairing Compound Hardener Medium Cure 1 Quart
A285-00
$57.75
PRO-SET Metering Pumps All 125 Resin Combinations Only.
A300-P
$12.89
PRO-SET Epoxy Technical Guide by Gougeon Bros.
FREE with purchase.
L501
$2.00
MGS HIGH PERFORMANCE EPOXY Approved by the German Federal Aviation Authority for use on aircraft. Good physiological compatibility and mechancial properties. Long shelf life and adjustable pot life by blending hardeners. Post cure recommended for maximum temperature tolerance. Technical data available upon request with any CST purchase.
NOTE: Hazardous Materials shipping applies to all MGS resins and hardeners. Resin and hardener must be shipped in separate boxes due to different classifications. Hazardous shipping charges will be added for each box.
MGS Epoxy - 285 Resin 1 Gallon 2 to 1 Mixing ratio requires 2 quarts of hardener per gallon of resin. Viscosity (cps) 600-900. (Standard Ground Shipping US ONLY)
AL285-B
$124.95
MGS Epoxy - 285 Hardener Fast Cure, 1 Quart 2 to 1 Mixing ratio requires 2 quarts of hardener per gallon of resin. Viscosity (cps) 50-100, mixing ratio 100:50 vol., pot life 40 min. (Standard Ground Shipping US ONLY)
AH285-B
$29.95
MGS Epoxy - 287 Hardener Slow Cure, 1 Quart Due to a change in the shipping requirements this hardener must now ship in Certified Packaging. We must charge an additional $35.00 per box for this packaging, however two quarts of hardener may ship in each package. In addition the normal Hazardous Materials shipping charge will also apply.
2 to 1 Mixing ratio requires 2 quarts of hardener per gallon of resin. Viscosity (cps) 80-100, mixing ratio 100:50 vol., pot life 4 hrs. (Standard Ground Shipping US ONLY)
AH287-B
$47.95
MGS Epoxy Technical Guide FREE with purchase.
L505
$1.00
WEST SYSTEM* EPOXY WEST SYSTEM brand epoxy is unique in that it is based around one resin with four different hardeners and six different fillers all of which can be mixed and matched to your specific application. Refer to the charts below as a guide when selecting the appropriate hardeners and fillers to meet your needs. The WEST SYSTEM User Manual and Product Guide is available upon request with any CST purchase. The letter designation following the item number is a size designation i.e. if you order an A size resin, the corresponding hardener will also be A size. WEST SYSTEM epoxy and hardeners have an excellent shelf-life when stored in sealed containers at room temperature. It is specifically designed to wet out and bond with wood, fiberglass, reinforcing fabrics and a variety of metals. When fully cured, WEST SYSTEM sands to a fine white powder.
HARDENER
APPLICATION
HARDENER TEMP RANGE (F) (Room Temp = 72)
Mixed
Viscosity
cPs
Cure Speeds at RT.
MINI
PUMP
(mixed ratio
by vol.)
Pot Life
100g
in pot
Working Time
thin film
Cured to Solid
thin film
40
50
60
70
80
90
100
205
Bonding
& Coating
975
9-12
min.
60-70
min.
6-8
hours
301
(5:1)
206
Bonding
& Coating
725
20-25
min.
90-110
min.
10-15
hours
301
(5:1)
207
Clear
Coating
775
22-27
min.
110-130
min
12-18
hours
303
(3:1)
209
Bonding
& Coating
725
40-50
min.
3-4
hours
20-24
hours
303
(3:1)
Note: Epoxy cures faster in warmer temperratures and in thicker applications –
Epoxy cures slower in cooler temperatures and in thinner appllications.
* Trademark of Gougeon Brothers, Inc. U.S.A.
West System - 105 Resin, 1 Quart A clear, low viscosity resin formulated for use with West System Hardeners. Use for composite construction and repairs that require high strength, moisture resistant coating, bonding and filling.
A105-A
$34.95
West System - 105 Resin, .98 Gallon A clear, low viscosity resin formulated for use with West System Hardeners. Use for composite construction and repairs that require high strength, moisture resistant coating, bonding and filling.
A105-B
$91.95
West System - 105 Resin, 4.35 Gallon A clear, low viscosity resin formulated for use with West System Hardeners. Use for composite construction and repairs that require high strength, moisture resistant coating, bonding and filling.
A105-C
$347.55
West System - 205 Hardener, Fast Cure, .44 Pint 205 Fast Hardener is a medium-viscosity epoxy curing agent. It is used in a majority of situations, at low temperatures and to produce a rapid cure that developes its physical properties quickly at room temperature. Requires a 5:1 mixing ratio with WEST SYSTEM 105 Resin. Yields a high-strength, moisture resistant solid with excellent bonding and coating properties. Pot Life 9 to 12 minutes. Cures to solid state 6 to 8 hours. Not intended for clear coating. (Standard Ground Shipping US ONLY).
A205-A
$16.25
West System - 205 Hardener, Fast Cure, .86 Quart 205 Fast Hardener is a medium-viscosity epoxy curing agent. It is used in a majority of situations, at low temperatures and to produce a rapid cure that developes its physical properties quickly at room temperature. Requires a 5:1 mixing ratio with WEST SYSTEM 105 Resin. Yields a high-strength, moisture resistant solid with excellent bonding and coating properties. Pot Life 9 to 12 minutes. Cures to solid state 6 to 8 hours. Not intended for clear coating. (Standard Ground Shipping US ONLY).
A205-B
$35.95
West System - 205 Hardener, Fast Cure, .94 Gallon 205 Fast Hardener is a medium-viscosity epoxy curing agent. It is used in a majority of situations, at low temperatures and to produce a rapid cure that developes its physical properties quickly at room temperature. Requires a 5:1 mixing ratio with WEST SYSTEM 105 Resin. Yields a high-strength, moisture resistant solid with excellent bonding and coating properties. Pot Life 9 to 12 minutes. Cures to solid state 6 to 8 hours. Not intended for clear coating. (Standard Ground Shipping US ONLY).
A205-C
$124.80
West System - 206 Hardener, Slow Cure, .44 Pint 206 Slow Hardener is a low viscosity epoxy curing agent for use when extended working and curing time is needed or to provide adequate working time at higher temperatures. Requires a 5:1 mixing ratio with WEST SYSTEM 105 resin. The cured mixture yields a rigid, high strength, moisture resistant solid with excellent bonding and coating properties. Pot life at 70F is 20 to 25 minutes. Cures to a solid in 10 to 15 hours. Not intended for clear coating. (Standard Ground Shipping US ONLY)
A206-A
$16.25
West System - 206 Hardener, Slow Cure, .86 Quart 206 Slow Hardener is a low viscosity epoxy curing agent for use when extended working and curing time is needed or to provide adequate working time at higher temperatures. Requires a 5:1 mixing ratio with WEST SYSTEM 105 resin. The cured mixture yields a rigid, high strength, moisture resistant solid with excellent bonding and coating properties. Pot life at 70F is 20 to 25 minutes. Cures to a solid in 10 to 15 hours. Not intended for clear coating. (Standard Ground Shipping US ONLY)
A206-B
$35.95
West System - 206 Hardener, Slow Cure, .94 Gallon 206 Slow Hardener is a low viscosity epoxy curing agent for use when extended working and curing time is needed or to provide adequate working time at higher temperatures. Requires a 5:1 mixing ratio with WEST SYSTEM 105 resin. The cured mixture yields a rigid, high strength, moisture resistant solid with excellent bonding and coating properties. Pot life at 70F is 20 to 25 minutes. Cures to a solid in 10 to 15 hours. Not intended for clear coating. NOTE: Hazardous materials shipping required. (Ground Shippng US ONLY)
A206-C
$124.80
West System - 207 Hardener, Special Coating, .66 Pint 207 Special Coating Hardener was developed for coating and fiberglass application where an exceptionally clear, moisture resistant, natural wood finish is desired. West System 105/207 mixtures resist clouding in humid conditions and exibit extreamly low blush formation. As low as any epoxy you will find anywhere, including so-called "no blush" epoxies. Pot life at 72F is 22 to 27 minutes. Cures to a solid state in 12 to 18 hours. Requires a 3:1 mixing ratio with WEST SYSTEM 105 Resin. (Standard Ground Shipping US ONLY)
A207-A
$31.90
West System - 207 Hardener, Special Coating, .33 Gallon 207 Special Coating Hardener was developed for coating and fiberglass application where an exceptionally clear, moisture resistant, natural wood finish is desired. West System 105/207 mixtures resist clouding in humid conditions and exibit extreamly low blush formation. As low as any epoxy you will find anywhere, including so-called "no blush" epoxies. Pot life at 72F is 22 to 27 minutes. Cures to a solid state in 12 to 18 hours. Requires a 3:1 mixing ratio with WEST SYSTEM 105 Resin. NOTE: Hazardous materials shipping required. (Ground Shippng US ONLY)
A207-B
$69.55
West System - 207 Hardener, Special Coating, 1.45 Gallon 207 Special Coating Hardener was developed for coating and fiberglass application where an exceptionally clear, moisture resistant, natural wood finish is desired. West System 105/207 mixtures resist clouding in humid conditions and exibit extreamly low blush formation. As low as any epoxy you will find anywhere, including so-called "no blush" epoxies. Pot life at 72F is 22 to 27 minutes. Cures to a solid state in 12 to 18 hours. Requires a 3:1 mixing ratio with WEST SYSTEM 105 Resin. NOTE: Hazardous materials shipping required. (Ground Shippng US ONLY)
