">

Carbon Fiber Trapezoids, Half Rounds, Squares

   
CST New-Banner-SM

CARBON FIBER TRAPEZOIDS
TRAILING EDGE T82X.jpg
Carbon fiber trapezoids are pultruded resulting in very straight fibers cured at high temperature yielding in high fiber to resin ratios and very stiff parts. CST carbon trapezoids contain no fillers - ONLY continuous fibers.

Compared to other materials and processes, CST carbon fiber trapezoids are twice as stiff as aluminum of the same cross section. CST carbon shapes are 350% stronger in tension and 550% stronger in compression than the traditional wet lay-up with carbon fiber tow and room teperature resin systems.



  • Volume Discounts on all Carbon Fiber Pultrusions and Laminates
    • 10-24 pieces per item #: 10% off
    • 25-49 pieces per item #: 15% off
    • 50-99 pieces per item #: 20% off
    • Over 100 pieces per item #: 25% off

    NOTE: No other discounts or special offers including Saver's Club can be used in conjunction with these discounts.

    NOTE: Lengths over 60" may require oversize shipping charges.

    Pultruded carbon fiber trapezoid shapes in epoxy resin system.

    For comparitive technical data on the different types of pultruded shapes, click HERE.

    • Carbon Fiber Trapezoid 0.063" Wide
    DPP SHAPES
    39.4" length, Thickness 0.024" taper to 0.016"
    Metric width 1.6 mm, thickness 0.6 mm, taper to 0.4 mm, length 1 m, weight 1.1 grams.         		  T821Lm $6.60
    Carbon Fiber Trapezoid 0.118" Wide
    DPP SHAPES
    39.4" length, Thickness 0.028" taper to 0.020"
    Metric width 3 mm, thickness 0.7 mm, taper to 0.5 mm, length 1 m, weight 2.7 grams.         		  T822Lm $8.05
    Carbon Fiber Trapezoid 0.150" Wide
    DPP SHAPES
    39.4" length, Thickness 0.033" taper to 0.024"
    Metric width 3.8 mm, thickness 0.9 mm, taper to 0.6 mm, length 1 m, weight 4.2 grams.         		  T823Lm $8.55
    CARBON FIBER HALF ROUNDS T80X.jpg
    Carbon fiber half rounds are pultruded resulting in very straight fibers cured at high temperature yielding in high fiber to resin ratios and very stiff parts. CST carbon half rounds contain no fillers - ONLY continuous fibers. Dimensional tolerances are +/- 0.005" and weight tolerances +/- 2-5%.

    Compared to other materials and processes, CST carbon fiber shapes are twice as stiff as aluminum of the same cross section. CST carbon shapes are 350% stronger in tension and 550% stronger in compression than the traditional wet lay-up with carbon fiber tow and room temperature resin systems.




  • Volume Discounts on all Carbon Fiber Pultrusions and Laminates
    • 10-24 pieces per item #: 10% off
    • 25-49 pieces per item #: 15% off
    • 50-99 pieces per item #: 20% off
    • Over 100 pieces per item #: 25% off

    NOTE: No other discounts or special offers including Saver's Club can be used in conjunction with these discounts.

    NOTE: Lengths over 60" may require oversize shipping charges.

    Standard pultruded carbon half rounds. One piece per package.

    For comparitive technical data on the different types of pultruded shapes, click HERE.

    • Carbon Fiber Half Round
    0.028" Radius, 39.37" (1m) Length
    0.70 mm x 1 m long
    1.2 grams         		  T801Lm $3.60
    Carbon Fiber Half Round
    0.031" Radius, 39.37" (1m) Length
    0.80 mm x 1 m long
    1.6 grams         		  T802Lm $3.60
    Carbon Fiber Half Round
    0.035" Radius, 39.37" (1m) Length
    0.90 mm x 1 m long
    2.1 grams         		  T803Lm $3.60
    Carbon Fiber Half Round
    0.039" Radius, 39.37" (1m) Length
    1 mm x 1 m long
    2.4 grams         		  T804Lm $4.00
    Carbon Fiber Half Round
    0.059" Radius, 39.37" (1m) Length
    1.5 mm x 1 m long
    5.3 grams         		  T805Lm $4.70
    Carbon Fiber Half Round
    0.079" Radius, 39.37" (1m) Length
    2 mm x 1 m long
    9.4 grams         		  T806Lm $5.55
    Carbon Fiber Half Round
    0.099" Radius, 39.37" (1m) Length
    2.5 mm x 1 m long
    14.7 grams         		  T807Lm $6.75
    CARBON FIBER SQUARE TUBES T91X.jpg
    Carbon fiber square tubes are pultruded resulting in very straight fibers cured at high temperature yielding in high fiber to resin ratios and very stiff parts. CST square carbon tubes contain no fillers - ONLY continuous fibers. Some sizes are available up to 82" long. Dimensional tolerances are +/- 0.005" and weight tolerances +/- 2-5%.

    Compared to other materials and processes, CST carbon fiber shapes are twice as stiff as aluminum of the same cross section. CST carbon shapes are 350% stronger in tension and 550% stronger in compression than the traditional wet lay-up with carbon fiber tow and room temperature resin systems.




  • Volume Discounts on all Carbon Fiber Pultrusions and Laminates
    • 10-24 pieces per item #: 10% off
    • 25-49 pieces per item #: 15% off
    • 50-99 pieces per item #: 20% off
    • Over 100 pieces per item #: 25% off

    NOTE: No other discounts or special offers including Saver's Club can be used in conjunction with these discounts.

    NOTE: Lengths over 60" may require oversize shipping charges.

    Pultruded carbon fiber square in epoxy resin with a round hole down the center.
    Much stiffer than round hollow carbon rods of the same diameter.

    For comparitive technical data on the different types of pultruded shapes, click HERE.

    • Carbon Fiber Square Tube
    0.156" Side
    40" Length
    0.098" dia. Hole, (3.9 mm side x 2.5 mm ID x 1 m), 16.3 g.     		  T915L3 $5.65
    Carbon Fiber Square Tube
    0.156" Side
    80" Length
    0.098" dia. Hole, (3.9 mm side x 2.5 mm ID x 2 m), 33.5 g.     		  T915L7 $11.10
    Carbon Fiber Square Tube
    0.196" Side
    40" Length
    0.125" dia. Hole, (5 mm side x 3.2 mm ID x 1 m), 25.2 g.     		  T919L3 $6.25
    Carbon Fiber Square Tube
    0.196" Side
    80" Length
    0.125" dia. Hole, (5 mm side x 3.2 mm ID x 2 m), 51.6 g.     		  T919L7 $12.20
    Carbon Fiber Square Tube
    0.250" Side
    2 Ft Length
    0.180" dia. Hole, (6.4 mm side x 4.6 mm ID x 0.6 m), 22.2 g.     		  T925L2 $4.90
    Carbon Fiber Square Tube
    0.250" Side
    4 Ft Length
    0.180" dia. Hole, (6.4 mm side x 4.6 mm ID x 1.2 m), 44.4 g.     		  T925L4 $9.65
    Carbon Fiber Square Tube
    0.250" Side
    8 Ft Length
    0.180" dia. Hole, (6.4 mm side x 4.6 mm ID x 2.4 m), 88.8 g.
    NOTE: Lengths over 60" may require oversize shipping charges.         		  T925L8 $20.95
    CARBON FIBER SQUARE TUBES WITH SQUARE HOLES
    Carbon Fiber Square Tube with Square Hole
    0.157" Side, 39.37" (1 m) Length
    0.098" Inner Side, (4 mm outer side x 2.5 mm inner side x 1 m), 13.3 grams     		  T931Lm $7.90
    Carbon Fiber Square Tube with Square Hole
    0.157" Side, 78.7" (2 m) Length
    0.098" Inner Side, (4 mm outer side x 2.5 mm inner side x 2 m), 26.6 grams
    NOTE: Lengths over 60" may require oversize shipping charges.         		  T931L2m $15.80
    Carbon Fiber Square Tube with Square Hole
    0.236" Side, 39.37" (1 m) Length
    0.157" Inner Side, (6 mm outer side x 4 mm inner side x 1 m), 27.6 grams     		  T933Lm $9.25
    Carbon Fiber Square Tube with Square Hole
    0.236" Side, 78.7" (2 m) Length
    0.157" Inner Side, (6 mm outer side x 4 mm inner side x 2 m), 55.3 grams
    NOTE: Lengths over 60" may require oversize shipping charges.         		  T933L2m $18.50
    Carbon Fiber Square Tube with Square Hole
    0.315" Side, 39.37" (1 m) Length
    0.236" Inner Side, (8 mm outer side x 6 mm inner side x 1 m), 36.2 grams     		  T935Lm $11.45
    Carbon Fiber Square Tube with Square Hole
    0.315" Side, 78.7" (2 m) Length
    0.236" Inner Side, (8 mm outer side x 6 mm inner side x 2 m), 72.5 grams
    NOTE: Lengths over 60" may require oversize shipping charges.         		  T935L2m $22.90
    Prices are in US dollars and subject to change without notice.