Puzzlemat Tile, 12" x 12" NEW - Puzzlemat Rotary Cutting Mat System of gridded interlocking pieces. Use with Rotary Cutters ONLY!
E8100
$7.50
Puzzlemat Tile, 6" x 12" NEW - Puzzlemat Rotary Cutting Mat System of gridded interlocking pieces. Use with Rotary Cutters ONLY!
E8125
$4.50
Puzzlemat Edges, 12" long, 6/pkg. NEW - Puzzlemat Rotary Cutting Mat System of gridded interlocking pieces. Use with Rotary Cutters ONLY!
E8150
$4.50
Puzzlemat 24" x 36" Set w/case, Edges NOT Included! NEW - Puzzlemat Rotary Cutting Mat System of gridded interlocking pieces. Use with Rotary Cutters ONLY!
E8175
$44.95
Puzzlemat 48" x 96" Set w/case, Edges Included! NEW - Puzzlemat Rotary Cutting Mat System of gridded interlocking pieces. Use with Rotary Cutters ONLY!
E8199
$239.95
Curved Scissors For trimming fabric in tight corners and mold edges.
E811
$6.95
Light weight shears Will Cut Aramid.
E814
$19.95
Cut Off Wheels (2/pkg) Fits Dremel style tools.
E852
$3.95
Cut Off Wheel with Mandrel Fits Dremel style tools.
E853
$3.95
Perma-Grit RF-1, 5/16" Cone, 1/8" Shaft, Coarse Rotory Grinding Tool The 1/8" arbor is designed to fit Dremel tools and Flexi-drives. They allow the user to cut a wide range of materials quickly and cleanly leaving an excellant finish. Ideal for routing, shaping, and removing material without tearing or clogging. The tool will make its own pilot hole in material, which can then be enlarged. Exellent on Plexiglass and Lexan, used below 10,000 RPM, will not melt, crack or chip the material. When cutting Aluminum use WD 40 oil to reduce loading. Note Always wear protective goggles when useing rotory tools. Maximum RPM is 20,000 Low - Medium.
E862
$14.99
Perma-Grit RF-6, 5/32" Rod, 1/8" Shaft, Coarse Rotory Grinding Tool The 1/8" arbor is designed to fit Dremel tools and Flexi-drives. They allow the user to cut a wide range of materials quickly and cleanly leaving an excellant finish. Ideal for routing, shaping, and removing material without tearing or clogging. The tool will make its own pilot hole in material, which can then be enlarged. Exellent on Plexiglass and Lexan, used below 10,000 RPM, will not melt, crack or chip the material. When cutting Aluminum use WD 40 oil to reduce loading. Note Always wear protective goggles when useing rotory tools. Maximum RPM is 20,000 Low - Medium.
E864
$14.99
Perma-Grit RD3, 3/4" and 1 1/4" Disk, 1/8" Shaft, Rotory Cutting Disk Set The 1/8" arbor is designed to fit Dremel tools and Flexi-drives. They allow the user to cut a wide range of materials quickly and cleanly leaving an excellant finish. Ideal for cutting Piano Wire, Fiberglass, Plastics, Woods and Ceramics, without tearing or clogging. Exellent on Plexiglass and Lexan, used below 10,000 RPM, will not melt, crack or chip the material. When cutting Aluminum use WD 40 oil to reduce loading. Note Always wear protective goggles when useing rotory tools. Maximum RPM is 20,000 Low - Medium.
E865
$23.99
Prices are in US dollars and subject to change without notice.
