Molding Parts In A Two Part Rubber Mold

2-part rubber mold

Open Tutorial



   
CST New-Banner-SM

MOLDING PARTS IN A TWO-PART RUBBER MOLD
Supplies needed to complete this project are listed below.
PRO-SET - 125 Resin Low Viscosity, 1 Quart 125-00 Pro-Set Laminating Resin, Low Viscosity   A125-00 $50.98
PRO-SET - 229 Hardener Slow Cure, 0.66 Pint 229-00 Pro-Set Laminating Hardener, Slow Cure
ORMD (Standard Ground Shipping US ONLY) 		  A229-00 $35.10
CST Milled Glass, 1 lb. Milled Glass Filler, 1 lb.
Price per pound, Minimum quantity 1 lb. 		  A4010 $15.95
Fiberglass Cloth 5.8 oz., 38" wide, 2 yd. pkg.   G37330-38 $21.95
Syringes, 2/pkg. 807-2 West System Syringes, 2/pkg.
Price per package, Minimum quantity 1 pkg.
Holds 12cc (approx. 0.4 fl. oz.) 		  A807-2 $4.22
Reusable Mixing Sticks, 8/pkg. 804-8 West System Reusable Mixing Sticks, 8/pkg.
Price per package, Minimum quantity 1 pkg.
Both ends are beveled
Rounded end shapes a 3/8" radius
Fillets easily
Use the square end for thorough mixing of epoxy and blending of fillers 		  A804-8 $2.80
8 oz. Poly Mixing Pot West System Poly Mixing Pot, 8 oz.
Reusable 		  A5001 $0.35
1/2" Glue Brushes, 12/pkg. 803-12 West System 1/2 in. Glue Brushes, 12/pkg.
Price per package, Minimum quantity 1 pkg. 		  A803-12 $5.31
Disposable Gloves, 4 pr./pkg. 832-4 West System Disposable Gloves, 4 pr./pkg.
Price per package, Minimum quantity 1 pkg. 		  A832-4 $5.75
Prices are in US dollars and subject to change without notice.